Electrocatalytic Glycerol Upgrading into Glyceric Acid on Ni3Sn Intermetallic Compound.

Electrochemical glycerol oxidation features an attractive approach of converting bulk chemicals into high-value products such as glyceric acid. Nonetheless, to date, the major product selectivity has mostly been limited as low-value C1 products such as formate, CO, and CO2, due to the fast cleavage of carbon-carbon (C-C) bonds during electro-oxidation. Herein, the study develops an atomically ordered Ni3Sn intermetallic compound catalyst, in which Sn atoms with low carbon-binding and high oxygen-binding capability allow to tune the adsorption of glycerol oxidation intermediates from multi-valent carbon binding to mono-valent carbon binding, as well as enhance *OH binding and subsequent nucleophilic attack. The Ni3Sn electrocatalyst exhibits one of the highest glycerol-to-glyceric acid performances, including a high glycerol conversion rate (1199 µmol h-1) and glyceric acid selectivity (62 ± 3%), a long electrochemical stability of > 150 h, and the capability of direct conversion of crude glycerol (85% purity) into glyceric acid. The work features the rational design of highly ordered catalytic sites for tailoring intermediate binding and reaction pathways, thereby facilitating the efficient production of high-value chemical products.

(111) Facet-oriented Cu2Mg Intermetallic Compound with Cu3-Mg Sites for CO2 Electroreduction to Ethanol with Industrial Current Density.

The efficient ethanol electrosynthesis from CO2 is challenging with low selectivity at high CO2 electrolysis rates, due to the competition with H2 and other reduction products. Copper-based bimetallic electrocatalysts are potential candidates for the CO2-to-ethanol conversion, but the secondary metal has mainly been focused on active components (such as Ag, Sn) for CO2 electroreduction, which also promote selectivity of ethylene or other reduction products rather than ethanol. Limited attention has been given to alkali-earth metals due to their inherently active chemical property. Herein, we rationally synthesized a (111) facet-oriented nano Cu2Mg (designated as Cu2Mg(111)) intermetallic compound with high-density ordered Cu3-Mg sites. The in situ Raman spectroscopy and density function theory calculations revealed that the Cu3 - δ $_{^{\rm{{\rm \delta} }} }$ --Mg- δ $_{^{\rm{{\rm \delta} }} }$ + active sites allowed to increase *CO surface coverage, decrease reaction energy for *CO-CO coupling, and stabilize *CHCHOH intermediates, thus promoting the ethanol formation pathway. The Cu2Mg(111) catalyst exhibited a high FEC2H5OH of 76.2±4.8 % at 600 mA⋅cm-2, and a peak value of |jC2H5OH| of 720±34 mA⋅cm-2, almost 4 times of that using conventional Cu2Mg with (311) facets, comparable to the best reported values for the CO2-to-ethanol electroreduction.

High-Power CO2-to-C2 Electroreduction on Ga-Spaced, Square-like Cu Sites.

The electrochemical conversion of CO2 into multicarbon (C2) products on Cu-based catalysts is strongly affected by the surface coverage of adsorbed CO (*CO) intermediates and the subsequent C-C coupling. However, the increased *CO coverage inevitably leads to strong *CO repulsion and a reduced C-C coupling efficiency, thus resulting in suboptimal CO2-to-C2 activity and selectivity, especially at ampere-level electrolysis current densities. Herein, we developed an atomically ordered Cu9Ga4 intermetallic compound consisting of Cu square-like binding sites interspaced by catalytically inert Ga atoms. Compared to Cu(100) previously known with a high C2 selectivity, the Ga-spaced, square-like Cu sites presented an elongated Cu-Cu distance that allowed to reduce *CO repulsion and increased *CO coverage simultaneously, thus endowing more efficient C-C coupling to C2 products than Cu(100) and Cu(111). The Cu9Ga4 catalyst exhibited an outstanding CO2-to-C2 electroreduction, with a peak C2 partial current density of 1207 mA cm-2 and a corresponding Faradaic efficiency of 71%. Moreover, the Cu9Ga4 catalyst demonstrated a high-power (∼200 W) electrolysis capability with excellent electrochemical stability.

Tailoring the * CO and * H Coverage for Selective CO2 Electroreduction to CH4 or C2 H4.

In the electrochemical CO2 reduction reaction (CO2 RR), the coverages of * CO and * H intermediates on a catalyst surface are critical for the selective generation of C1 or C2 products. In this work, we have synthesized several Cux Zny Mnz ternary alloy electrocatalysts, including Cu8 ZnMn, Cu8 Zn6 Mn, and Cu8 ZnMn2 , by varying the doping compositions of Zn and Mn, which are efficient in binding * CO and * H adsorbates in the CO2 electroreduction process, respectively. The increase of * H coverage allows to promotion of the CH4 and H2 formation, while the increase of the * CO coverage facilitates the production of C2 H4 and CO. As a result, the Cu8 ZnMn catalyst presented a high CO2 -to-CH4 partial current density (-418 ± 22 mA cm-2 ) with a Faradaic efficiency of 55 ± 2.8%, while the Cu8 Zn6 Mn catalyst exhibited a CO2 -to-C2 H4 partial current density (-440 ± 41 mA cm-2 ) with a Faradaic efficiency of 58 ± 4.5%. The study suggests a useful strategy for rational design and fabrication of Cu electrocatalysts with different doping for tailoring the reduction products.

Over 2 A cm-2 CO2 -to-Ethanol Conversion by Alkali-Metal Cation Induced Copper With Dominant (200) Facets.

The high-rate ethanol electrosynthesis from CO2 is challenging due to the low selectivity and poor activity, which requires the competition with other reduction products and H2 . Here, the electrochemical reconstruction of Cs3 Cu2 Cl5 perovskite to form surface Cl-bonded, low-coordinated Cs modified Cu(200) nanocubes (CuClCs), is demonstrated. Density functional theory calculations reveal that the CuClCs structure possesses low Bader charges and a large coordination capacity; and thus, can promote the CO2 -to-ethanol pathway via stabilizing C-O bond in oxygenate intermediates. The CuClCs catalyst exhibits outstanding partial current densities for producing ethanol (up to 2124 ± 54 mA cm-2 ) as one of the highest reported values in the electrochemical CO2 or CO reduction. This work suggests an attractive strategy with surface alkali-metal cations for ampere-level CO2 -to-ethanol electrosynthesis.

Unraveling and tuning the linear correlation between CH4 and C2 production rates in CO2 electroreduction.

Although many catalysts have been reported for the CO2 electroreduction to C1 or C2 chemicals, the insufficient understanding of fundamental correlations among different products still hinders the development of universal catalyst design strategies. Herein, we first discover that the surface *CO coverage is stable over a wide potential range and reveal a linear correlation between the partial current densities of CH4 and C2 products in this potential range, also supported by the theoretical kinetic analysis. Based on the mechanism that *CHO is the common intermediate in the formation of both CH4 (*CHO â†’ CH4) and C2 (*CHO + *CO â†’ C2), we then unravel that this linear correlation is universal and the slope can be varied by tuning the surface *H or *CO coverage to promote the selectivity of CH4 or C2 products, respectively. As proofs-of-concept, using carbon-coated Cu particles, the surface *H coverage can be increased to enhance CH4 production, presenting a high CO2-to-CH4 Faradaic efficiency ( [Formula: see text] ∼52%) and an outstanding CH4 partial current density of -337 mA cm-2. On the other hand, using an Ag-doped Cu catalyst, the CO2RR selectivity is switched to the C2 pathway, with a substantially promoted [Formula: see text] of 79% and a high partial current density of -421 mA cm-2. Our discovery of tuning intermediate coverages suggests a powerful catalyst design strategy for different CO2 electroreduction pathways.

Surface Co-Modification of Halide Anions and Potassium Cations Promotes High-Rate CO2 -to-Ethanol Electrosynthesis.

The high-rate electrochemical CO2 conversion to ethanol with high partial current density is attractive but challenging, which requires competing with other reduction products as well as hydrogen evolution. This work demonstrates the in situ reconstruction of KCuF3 perovskite under CO2 electroreduction conditions to fabricate a surface fluorine-bonded, single-potassium-atom-modified Cu(111) nanocrystal (K-F-Cu-CO2 ). Density functional theory calculations reveal that the co-modification of both F and K atoms on the Cu(111) surface can promote the ethanol pathway via stabilization of the CO bond and selective hydrogenation of the CC bond in the CH2 CHO* intermediate, while the single modification of either F or K is less effective. The K-F-Cu-CO2 electrocatalyst exhibits an outstanding CO2 -to-ethanol partial current density of 423 ± 30 mA cm-2 with the corresponding Faradaic efficiency of 52.9 ± 3.7%, and a high electrochemical stability at large current densities, thus suggesting an attractive means of surface co-modification of halide anions and alkali-metal cations on Cu catalysts for high-rate CO2 -to-ethanol electrosynthesis.

Controllable States and Porosity of Cu-Carbon for CO2 Electroreduction to Hydrocarbons.

The electrocatalytic carbon dioxide reduction reaction (CO2 RR) to value-added chemical products is an effective strategy for both greenhouse effect mitigation and high-density energy storage. However, controllable manipulation of the oxidation state and porous structure of Cu-carbon based catalysts to achieve high selectivity and current density for a particular product remains very challenging. Herein, a strategy derived from Cu-based metal-organic frameworks (MOFs) for the synthesis of controllable oxidation states and porous structure of Cu-carbon (Cu-pC, Cu2 O-pC, and Cu2 O/Cu-pC) is demonstrated. By regulating oxygen partial pressure during the annealing process, the valence state of the Cu and mesoporous structures of surrounding carbon are changed, leads to the different selectivity of products. Cu2 O/CuO-pC with the higher oxidation state exhibits FEC2H4 of 65.12% and a partial current density of -578 mA cm-2 , while the Cu2 O-pC shows the FECH4 over 55% and a partial current density exceeding -438 mA cm-2 . Experimental and theoretical studies indicate that porous carbon-coated Cu2 O structures favor the CH4 pathway and inhibit the hydrogen evolution reaction. This work provides an effective strategy for exploring the influence of the various valence states of Cu and mesoporous carbon structures on the selectivity of CH4 and C2 H4 products in CO2 RR.

Electron Localization and Lattice Strain Induced by Surface Lithium Doping Enable Ampere-Level Electrosynthesis of Formate from CO2.

The electrochemical CO2 conversion to formate is a promising approach for reducing CO2 level and obtaining value-added chemicals, but its partial current density is still insufficient to meet the industrial demands. Herein, we developed a surface-lithium-doped tin (s-SnLi) catalyst by controlled electrochemical lithiation. Density functional theory calculations indicated that the Li dopants introduced electron localization and lattice strains on the Sn surface, thus enhancing both activity and selectivity of the CO2 electroreduction to formate. The s-SnLi electrocatalyst exhibited one of the best CO2 -to-formate performances, with a partial current density of -1.0 A cm-2 for producing formate and a corresponding Faradaic efficiency of 92 %. Furthermore, Zn-CO2 batteries equipped with the s-SnLi catalyst displayed one of the highest power densities of 1.24 mW cm-2 and an outstanding stability of >800 cycles. Our work suggests a promising approach to incorporate electron localization and lattice strain for the catalytic sites to achieve efficient CO2 -to-formate electrosynthesis toward potential commercialization.

An in situ decorated cathode with LiF and F@C for performance enhanced Li-S batteries.

A simple but effective in situ decorated cathode is presented for Li-S batteries, utilizing the irreversible discharge products between a cathode additive (carbon fluoride) and Li. The in situ formed LiF and F doped carbon can be functional and beneficial to the battery performance, not only suppressing the "shuttle effect", but also facilitating the electron and ion transportation and accelerating the reaction kinetics.

Co3O4 nanoparticles embedded in nitrogen-doped graphitic carbon fibers as a free-standing electrode for promotion of lithium ion storage with capacitive contribution.

Here, we wrap Co3O4 nanoparticles with nitrogen-doped graphitic carbon nanofibers (Co3O4@NGFs) as a self-standing electrode for lithium-ion batteries. In this structure, graphitic carbon acts as a composite framework that enhances conductivity, accommodates volume expansion and increases contact with the electrolyte. Meanwhile, the porosity of Co3O4@NGFs not only facilitates rapid electron transfer, but also exposes more active sites for lithium storage.

Conductive MOF-Modified Separator for Mitigating the Shuttle Effect of Lithium-Sulfur Battery through a Filtration Method.

Although there are plenty of merits for lithium-sulfur (Li-S) batteries, their undesired shuttle effect and insulated nature are hindering the practical applications. Here, a conductive metal-organic framework (MOF)-modified separator has been designed and fabricated through a facile filtration method to address the issues. Specifically, its intrinsic microporous structure, hydrophilic polar property, and conductive feature could make it easy to contact with and trap polysulfides and boost the kinetics of electrochemical reactions. Both the physical and chemical properties of the as-prepared separator are beneficial to alleviating the shuttle effect and enhancing the rate capability. Accordingly, the electrochemical performance of the battery with a MOF-modified separator was significantly improved.

Recovery of Over-Ground Walking after Chronic Motor Complete Spinal Cord Injury.

Persons with motor complete spinal cord injury, signifying no voluntary movement or sphincter function below the level of injury but including retention of some sensation, do not recover independent walking. We tested intense locomotor treadmill training with weight support and simultaneous spinal cord epidural stimulation in four patients 2.5 to 3.3 years after traumatic spinal injury and after failure to improve with locomotor training alone. Two patients, one with damage to the mid-cervical region and one with damage to the high-thoracic region, achieved over-ground walking (not on a treadmill) after 278 sessions of epidural stimulation and gait training over a period of 85 weeks and 81 sessions over a period of 15 weeks, respectively, and all four achieved independent standing and trunk stability. One patient had a hip fracture during training. (Funded by the Leona M. and Harry B. Helmsley Charitable Trust and others; ClinicalTrials.gov number, NCT02339233 .).